Certification
Green Certified Product Detail

NGBS point-worthy green home building products for NGBS Green Certification.

CertainTeed Restoration Millwork

Product Information

CertainTeed Restoration Millwork cellular PVC trim is a cost-effective, low maintenance alternative to exterior wood trim.

Certifications

 
     
      NGBS 2015
      Practice # Practice Points Available Additional Conditions of Use to Earn Points
      601.7 Prefinished building materials or assemblies listed below have no additonal site-applied finishing material are installed. 2 or 5 For 5 points, 90% or more of the installed trim must be this product. For 2 points, 50 - 90% of the installed trim must be this product.

      CertainTeed Vinyl and Polymer products come pre-colored and do not require additional finish.

      Manufacturer’s Comments
      602.1.6 Termite-resistant materials are used in portions of the building. 2,4, or 6 To earn 2 points, product is used in conjunction with other termite-resistant materials for the first 2 ft of all the foundation, floor, and structural wall, wall cladding, and exterior deck components in zones with slight to moderate termite infestation. Four points are awarded when used in conjunction with other termite-resistant materials for the first 3 ft in moderate to heavy termite zones, and 6 points are awarded for use with other termite-resistant materials for all of the foundation, floor, and structural wall, wall cladding, and exterior deck components in areas of very heavy termites.
      610.1.2.1 A product with improved environmental impact measures compared to another product is selected. 3 Points are available when this product is selected over another option based on LCA analysis. The material to which this product is compared must be suitable and reasonable for the building and local market.

      CertainTeed Restoration Millwork is a more environmentally preferable product based upon the use of the Life Cycle Assessment performed.

      Manufacturer’s Comments
      611.4.2 At least 10 different products are installed with product-specific Type III EPDs. All EPDs are certified as complying with the goal and scope for cradle-to-gate requirements in accordance with ISO Standards 14025 and 21930. 5 points available. 5 A minimum of 10 products with certified EPDs were selected and installed.

      CertainTeed has a third-party verified EPD.

      Manufacturer’s Comments
      NGBS 2020
      Practice # Practice Points Available Additional Conditions of Use to Earn Points
      601.7 Prefinished building materials or assemblies listed 2 or 5 For 5 points, 90% or more of the installed trim must be this product. For 2 points, 50 - 90% of the installed trim must be this product.

      CertainTeed Vinyl and Polymer products come pre-colored and do not require additional finish.

      Manufacturer’s Comments
      602.1.6 Termite-resistant materials are used in portions of the building. 2, 4, or 6 To earn 2 points, product is used in conjunction with other termite-resistant materials for the first 2 ft of all the foundation, floor, and structural wall, wall cladding, and exterior deck components in zones with slight to moderate termite infestation. Four points are awarded when used in conjunction with other termite-resistant materials for the first 3 ft in moderate to heavy termite zones, and 6 points are awarded for use with other termite-resistant materials for all of the foundation, floor, and structural wall, wall cladding, and exterior deck components in areas of very heavy termites.
      610.1.2.1 A product with improved environmental impact measures compared to another product(s) intended for the same use is selected. 2 points for product with 4 impact measures; 3 points for product with 5 impact measures. 10 points max. 3 Points are available when this product is selected over another option based on LCA analysis. The material to which this product is compared must be suitable and reasonable for the building and local market.

      CertainTeed Restoration Millwork is a more environmentally preferable product based upon the use of the Life Cycle Assessment performed.

      Manufacturer’s Comments
      611.1.2 At least 10 different products are installed with product-specific Type III EPDs. All EPDs are certified as complying with the goal and scope for cradle-to-gate requirements in accordance with ISO Standards 14025 and 21930. 5 points available. 5 A minimum of 10 products with certified EPDs were selected and installed.

      CertainTeed has a third-party verified EPD.

      Manufacturer’s Comments