We Break Down Barriers to Innovation
Call 800.638.8556

Lab Certified Products

Home Innovation Lab Certified Products

It is easy to make claims about product performance, but difficult to demonstrate it. Home Innovation Research Labs' Laboratory Services Division is an accredited ISO 17025 test lab, ISO 17020 inspection body, and ISO 17065 product certification body with more than 50 years of experience. Builders, product manufacturers, code officials and consumers look to us to confirm compliance with code requirements and claims about product performance. From plumbing products, to solid surface materials, to cold formed steel, to insulation, and more, the Home Innovation Lab Certified mark is proof of compliance.

Products listed under Lab Certified Products have been qualified to display the Home Innovation Lab Certified mark and are deemed to comply with the noted certification program.

Cold Formed Steel Framing

Home Innovation's certification provides assurance that certified products comply with the requirements of the 2021 International Building Code (IBC). These requirements include material properties, dimensional tolerances, and labeling as detailed in various ASTM standards including ASTM C645, ASTM 653, ASTM C955, and ASTM A1003. Periodic inspection at the manufacturing location by Home Innovation and testing at Home Innovation’s lab verifies the product compliance. Manufacturers of certified product are also required to have a documented quality management system.

Engineered Structural Wood Products

Under Home Innovation Research Labs third-party Oriented Strand Board (OSB) Product Certification program, products are tested to meet nationally-recognized standards. Our certification mark represents the benchmark of quality and code compliance that builders, code officials, and consumers recognize and trust.

Through periodic quality system auditing, mill inspection, and product testing Home Innovation Research Labs verifies that these mills produce grade-stamped product bearing Home Innovation Lab Certified mark that meets the requirements of PS2 and HUD UM40c.

Insulation Products

Testing all types of insulation products – including fiberglass batts and metal building insulation – Home Innovation Research Lab’s third-party certification program verifies that the R-value displayed on a product’s label and the R-value of the material inside the package are one and the same. The Federal Trade Commission (FTC) Rule 460, the R-value Rule, sets the requirement for claims about home insulation performance. The North American Insulation Manufacturer’s Association (NAIMA) 202-96 standard “For Flexible Fiber Glass Insulation to be Laminated for Use in Metal Buildings” sets the thermal resistance requirements for unfaced fiberglass insulation. The National Insulation Association’s (NIA) “Certified Faced Insulation Standard” sets the requirements for products produced by metal building insulation laminators. Home Innovation helps insulation manufacturers comply with these published standards and codes.

Our certification procedures for insulation products include periodic factory inspections by Home Innovation field representatives to randomly sample and evaluate product specimens. Following in-plant testing, specimens are sent to Home Innovation’s thermal research lab for testing and certification services. To discuss how our certification can help you meet all your regulatory requirements, contact us today.

Manufacturer Information Product Information

Bay Insulation Systems

2929 Walker Drive
Green Bay, WI 543

www.bayinsulation.com/
  • Certified Faced Insulation
  • CR # 173 – Phoenix, AZ
  • CR # 124 – Fresno, CA
  • CR # 149 – Aurora, CO
  • CR # 147 – Orlando, FL
  • CR # 159 – Pensacola, FL
  • CR # 148 – Norcross, GA
  • CR # 163 – Indianapolis, IN
  • CR # 168 – Louisville, KY
  • CR # 151 – Baton Rouge, LA
  • CR # 157 – Fridley, MN
  • CR # 120 – Kansas City, MO
  • CR # 158 – St. Louis, MO
  • CR # 121 – High Point, NC
  • CR # 174 – Raleigh, NC
  • CR # 160 – Brooklyn Heights, OH
  • CR # 162 – Easton, PA
  • CR # 150 – Memphis, TN
  • CR # 153 – Dallas, TX
  • CR # 166 – Houston, TX
  • CR # 165 – San Marcos, TX
  • CR # 152 – Roanoke, VA
  • CR # 167 – Sumner, WA
  • CR # 161 – Green Bay, WI

CertainTeed Corporation

18 Moores Road
Malvern, PA 19355

www.certainteed.com

Unfaced Fiberglass Insulation
Chowchilla, CA
Kansas City, KS


Johns Manville Corporation

717 17th Street
Denver, CO 80202

303.978.2000
www.jm.com
  • Unfaced Fiberglass Insulation
  • McPherson, KS

L&L Insulations

5525 NE 22nd Street
Des Moines, IA 50313

515.246.2070
800.747.5385
www.llinsulation.com
  • Certified Faced Insulation
  • CR # 105 – St. Louis, MO

Owens Corning

World Headquarters
One Owens Corning Parkway 2C
Toledo, OH 43659

www.owenscorning.com
  • Unfaced Fiberglass Insulation
  • Newark, OH
  • Waxahachie, TX

Service Partners, LLC
154

135 Denver Business Park
Mooresville, NC 28115

704.799.8247
www.service-partners.com
  • Certified Faced Insulation

The E.J. Davis Company
106

10 Dodge Avenue
North Haven, CT 06473

203.239.5391
www.ejdavisinsulation.com
  • Certified Faced Insulation

Therm-All Insulation
101

830 Canterbury Rd.
Suite A, 2nd Floor
Westkake, OH 44145

800.886.9494
therm-all.com
  • Certified Faced Insulation

Plumbing Products

Home Innovation Research Labs conducts tests and provides certification of plastic plumbing fixtures for conformance to the requirements specified in the Uniform Plumbing Code (UPC). Lavatories, shower receptors, shower bases, bathtubs, whirlpool bathtubs, and sinks must meet the criteria outlined in either CSA B45.5/IAPMO Z124 for Plastic Plumbing Fixtures or CSA B45.8/IAPMO Z403 for Terrazzo, Concrete, Composite Stone, and Natural Stone Plumbing Fixtures. Whirlpool bathtubs shall comply with ASME A112.19.7/CSA B45.10 Hydromassage Bathtub Systems. Pressure sealed doors within a bathtub or whirlpool bathtub enclosure shall comply with ASME A112.19.15 Bathtubs/Whirlpool Bathtubs With Pressure Sealed Doors.

Fixtures used in a plumbing system shall be listed (third-party certified) by a listing agency (accredited conformity assessment body) as complying with the approved applicable recognized standards. The Laboratory Services Division of Home Innovation Research Labs holds the following credentials:

  • Accredited by A2LA as a testing lab, inspection body and product certification body
  • Approved as an IAPMO testing laboratory
  • Approved as a City of Los Angeles listing agency and testing agency
  • Recognized by the U.S. Department of Housing and Urban Development (HUD) as an administrator for HUD Building Product Standards and Certification Program for Plastic Bathroom Fixtures as specified in the Use of Materials Bulletin UM 73a
Manufacturer Information Product Information

Anish Hospitality
6554

Block No 142, Survey No 180,
Palki Plot No 1
Bhavnagar-364002, Gujarat, India

Solid Surface Shower Bases and Shower/Tub Surround Panels


Apollo Designs
6554R

2147 Brevard Road
High Point, NC 27263

www.apollodesigns.net

Solid Surface Shower Bases and Shower/Tub Surround Panels


BathWraps
6085

401 South Gary Ave #A
Roselle, IL 60172-1652

888.546.3778
https://www.bathwraps.com
  • Acrylic/ABS Foam-backed Shower Bases
  • Acrylic/ABS Foam-backed Bathtubs

BCI Acrylic Bath Systems Inc.
6095

1800 Industrial Drive
Libertyville, IL 60048

800.963.8827
www.bciacrylic.com
  • Acrylic Foam Reinforced Plastic Bathtubs
  • Acrylic Foam Reinforced Plastic Shower Bases
  • Acrylic Bathtub Liners

DuPont Specialty Products USA, LLC
6515 & 6515R

3115 River Road
Buffalo, NY 14207

800.426.7426
www.dupont.com/Surfaces
  • Solid Surface Lavatories
  • Solid Surface Kitchen Sinks
  • Solid Surface Baby Baths

Futrus
6550

154 Distl Avenue
Mansfield, OH 44902

877.388.7871
www.futrus.com
  • Solid Surface Shower Bases
  • Solid Surface Lavatories

Gemstone
6539

435 Harrison Street
Elkhart, IN 46516

877.233.7893
www.gemstoness.com
  • Solid Surface Kitchen Sinks
  • Solid Surface Lavatories
  • Solid Surface Shower Bases

Grifform Innovations, Inc.
6532

P.O. Box 258
Glide, OR 97443-0258

541.496.0313
www.grifform.com
  • Solid Surface Kitchen Sinks
  • Solid Surface Lavatories / Baby Baths
  • Solid Surface Shower Bases

GRL Industries, LLC dba Durasein
6547R

7030 Quad Avenue
Rosedale, MD 21237

www.duraseinusa.com
  • Solid Surface Kitchen Sinks
  • Solid Surface Lavatories

LX Hausys America, Inc.
6551R

3480 Preston Ridge Rd #350
Alpharetta, GA 30005

  • Solid Surface Kitchen Sinks
  • Solid Surface Lavatories

Meganite
6555R

PO Box 4206
Diamond Bar, CA 91765

  • Solid Surface Kitchen Sinks
  • Solid Surface Lavatories
  • Solid Surface Shower Bases

Mincey Marble Manufacturing, Inc.
6115

4321 Browns Bridge Road
Gainesville, GA 30501

770.532.0451
www.minceymarble.com
  • Cultured Marble Shower Bases

MTI Baths, Inc.
6553

670 North Price Road
Sugar Hill, GA 30518

800.783.8827
www.mtibaths.com
  • Dolomatte Shower Bases

Oasis Lifestyle, LLC
6006

P.O. Box 82
Plymouth, IN 46563

574.948.0004
www.oasisbath.com
  • Acrylic Fiberglass Reinforced Plastic Bathtubs
  • Acrylic Fiberglass Reinforced Plastic Shower Stalls
  • Acrylic Fiberglass Reinforced Plastic Tub/Showers
  • Acrylic Fiberglass Reinforced Plastic Whirlpool Tubs
  • Gelcoated Fiberglass Reinforced Plastic Bathtubs
  • Gelcoated Fiberglass Reinforced Plastic Shower Bases
  • Gelcoated Fiberglass Reinforced Plastic Shower Stalls
  • Gelcoated Fiberglass Reinforced Plastic Tub/Showers
  • Gelcoated Fiberglass Reinforced Plastic Whirlpool Tubs

Oliver Fiberglass
6003

P.O. Box 338
Hohenwald, TN 38462

931.796.6600
www.oliverfiberglassproducts.com
  • Gelcoated Fiberglass Reinforced Plastic Whirlpool Bathtubs with Pressured Sealed Doors
  • Gelcoated Fiberglass Reinforced Plastic Shower Bases

Palmetto Surfacing, Inc.
6544

7645 Southrail Road
North Charleston, SC 29420

843.569.1131
www.palmettosurfacing.com
  • Solid Surface Custom Shower Bases

Shower Shapes
6512

2432 Palma Drive
Ventura, CA 93003

800.316.4989
www.showershapes.com
  • Solid Surface Shower Bases

Sprovieri’s Custom Counters
6546

55 Laura Drive
Addison, IL 60101

630.543.3400
www.sprovieris.com
  • Solid Surface Lavatories

Sterling Surfaces
6552

76 Leominster Rd.
Sterling, MA 01564

978.422.3321
www.sterlingsurfaces.com
  • Solid Surface Lavatories

Tower Industries
6538

2101 Ninth Street SW
Massillon, OH 44647

800.807.8889
www.towersurfaces.com
  • Solid Surface Lavatories
  • Solid Surface Shower Bases

Virginia Marble Manufacturers, Inc.
6148

P.O. Box 766
Kenbridge, VA 23944

434.676.3204
www.virginiamarble.com
  • Cultured Marble Lavatories
  • Cultured Granite Lavatories

Solid Surface Materials

Home Innovation Research Labs' solid surface material certification program evaluates critical properties including structure, water resistance, colorfastness, stain resistance, and cleanability. It also assesses key factors like seam integrity, repairability, and adherence to manufacturing and quality control standards. The certification process involves an initial in-plant inspection, annual product testing, and ongoing verification of the manufacturer's quality control program.

Tour Our Full-Service Testing Labs 

Comprehensive Product Testing Services for the Building Industry

Inside Our 30,000 Sq Ft Testing Labs

Home Innovation Labs' state-of-the-art testing laboratory houses a wide variety of test equipment that sets us apart as a leading testing facility for building products and materials.


Schedule Your Tour

Terms of Use | Privacy Policy

Home Innovation Research Labs is an independent subsidiary of the National Association of Home Builders (NAHB).
Copyright © 2025 All Right Reserved. This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Website Design & Development by JET Advertising.